slawzy14
08-07-2009, 03:04 PM
You will need:
Copper pipe
Spanner
Step 1:
Find some old copper pipe lying around.
Step 2:
Make sure the external measurement is 15mm and the internal is 12mm.
Step 3:
Now chop the pipe so it is the same length of the hole in the forks where the axel will go through.
Step 4:
Put the copper spacers in the axel hole on the forks.
Step 5:
Add your wheel and your ready to go.
Hope this helps you all:thumbs:
Copper pipe
Spanner
Step 1:
Find some old copper pipe lying around.
Step 2:
Make sure the external measurement is 15mm and the internal is 12mm.
Step 3:
Now chop the pipe so it is the same length of the hole in the forks where the axel will go through.
Step 4:
Put the copper spacers in the axel hole on the forks.
Step 5:
Add your wheel and your ready to go.
Hope this helps you all:thumbs: