HELP! replacing throttle

[Acidman]

hi
getting a new throttle fitted
its a brembo 1/4 turn
just wanting to know how to take off the old throttle and cable and fit my new un!
pics would be really helpful

Cheers;)

[jthump110]

hi
getting a new throttle fitted
its a brembo 1/4 turn
just wanting to know how to take off the old throttle and cable and fit my new un!
pics would be really helpful

Cheers;)


undo the two bolts on carb...
screw the top off the carb.. then push up with the spring then ur see ur throttle cable... grab the throttle cable, then take it from the slide and then the spring then u should be able to just slide the throttle cable out....

p.s. i had a brembo throttle, and its a bitch to workk.. just see how u do!!!

[Acidman]

which 2 bolts??
is there actually 2 bolts to undo or do i just unscrew the top bit??

[Charlie_G]

you can do it without taking the carb off but it will be very hard so its a lot easier to just take the 2 bolts that are holding your carb to the manifold off.

[Acidman]

ohh them 2 bolts!
i get it now
cheers:thumbs:

[laf375_scatman]

hey...is there any particular make of 1/4 turn throttles u'd recommend? i'm lookin for one to but dont really know where to go.
thanks man

[XpitbikerX]

old thread mate.....