front sprocket /help

[mx maniac]

rite then i went out on my bike today had a good hour and half driving aroundgot it home thought id have a check on a few things lucky i did i first noticed the rear sprocet was loose no problem tightened up the bolts with a bit of threadlock then i noticed the small/front sprocket was loose but i couldnt tighten it up anymore is this how the small 1 is supposed to be or do i need a new sproket plz help me

[kirky]

front one always wobbles a bit, as long as the retaining plate with the two bolts is still there

not sure why they have movement, maybe some one can tell us why?

[mx maniac]

ok mate i found that a bit strange for it to be like that but the plate and bolts are still there ill just have to keep an eye on it thanks for ure reply

[full throtle]

All front sprokets have a little play in them, probably to help prevent the chain jumping off of the front sproket, by finding its way into the chain links better when the chain is flying around when your riding at speed.
Like above.solong as the retaining bolts are tights you dont have a problem mate, just the way it is.
Alex

[full throtle]

All front sprokets have a little play in them, probably to help prevent the chain jumping off of the front sproket, by finding its way into the chain links better when the chain is flying around when your riding at speed.
Like above.....so long as the retaining bolts are tights you dont have a problem mate, just the way it is.
Alex

[mx maniac]

cheers guys uve been a great help all tightened up and ready for another ride on it think ill take some tools with me this time

thanks