Pit Bike Club
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Pit Bike Club (https://www.pitbikeclub.co.uk/index.php)
-   Moto-X (https://www.pitbikeclub.co.uk/forumdisplay.php?f=57)
-   -   YZ125 VIN Number Website (https://www.pitbikeclub.co.uk/showthread.php?t=18820)

pit bike pete! 11-01-2009 10:43 PM
Re: YZ125 VIN Number Website
 
hi mate , we have had about 10 yz ,new and 2nd hand got a 2006 yz 125 now it has 12 numbers on engine and 12 on frame , this bike was from new :thumbs:

Alex10 11-01-2009 10:48 PM
Re: YZ125 VIN Number Website
 
Your best bet would be to ring a yamaha dealer and ask them.

MiiTCH 12-01-2009 04:31 PM
Re: YZ125 VIN Number Website
 
im dumpin it now... Because some people are saying its older than 03, whats the best thing to do and what do you lot think the year of it is?

pit bike pete! 12-01-2009 10:54 PM
Re: YZ125 VIN Number Website
 
year ?? say o2/03 , just have fun on it ,keep an eye on water and do a piston kit from time 2 time .full piston kit of ebay £45 , but get spare rings ,then just do the ring next time , that will keep it going 4 fun riding :thumbs::thumbs::thumbs: p.s do grear oil after 10hr keep them grears in good order

MiiTCH 13-01-2009 03:58 PM
Re: YZ125 VIN Number Website
 
Quote:
Originally Posted by pit bike pete! (Post 206471)
year ?? say o2/03 , just have fun on it ,keep an eye on water and do a piston kit from time 2 time .full piston kit of ebay £45 , but get spare rings ,then just do the ring next time , that will keep it going 4 fun riding :thumbs::thumbs::thumbs: p.s do grear oil after 10hr keep them grears in good order


Ok, thanks mate :thumbs: i think its over due a piston kit, because its not got much compression, so im going to see how much it would cost for my local shop to do it, if its too much ill just buy the bits and do it myself :thumbs:

englishjenny 15-01-2009 10:20 PM
Re: YZ125 VIN Number Website
 
did you find out year?;)

Wiggy_ 15-01-2009 11:05 PM
Re: YZ125 VIN Number Website
 
Quote:
Originally Posted by MiiTCH (Post 206604)
Ok, thanks mate :thumbs: i think its over due a piston kit, because its not got much compression, so im going to see how much it would cost for my local shop to do it, if its too much ill just buy the bits and do it myself :thumbs:
about 160 quid my local shop wanted for a piston in my m8s yz 125 lol

MiiTCH 21-01-2009 08:58 PM
Re: YZ125 VIN Number Website
 
Quote:
Originally Posted by englishjenny (Post 207885)
did you find out year?;)

Yea, its a 1998 :(

But its not too bad, because all yz's from 98-05 are partly the same, when Yamaha got to 2005, they completely scraped the old engine design and re-made a complete new engine for 2006+

And i have a shop about 100metres from my house that are Yamaha specialists, and they gave us a parts catalogue for my bike, and it has EVERYTHING on the entire bike, so we can just order it from them which is a good thing :D

yammy-lover 25-01-2009 03:16 PM
Re: YZ125 VIN Number Website
 
Quote:
Originally Posted by MiiTCH (Post 205660)
Thanks.. Im having a slight problem.. The only code i can find on the frame is CE01C004304... Which isnt long enough for a VIN Code... Where would you look to find a 17 Digit one.. The code I have is printed on the front of the frame where the forks are connected to..

HELP!!!!!
i was allways told the last 2 numbers in the code were what year the bike is.
meaning yours would be 04. mines right, stamped on the frame engine and swinger. everyone have a check and see if im right.

MiiTCH 25-01-2009 03:24 PM
Re: YZ125 VIN Number Website
 
Quote:
Originally Posted by yammy-lover (Post 211080)
i was allways told the last 2 numbers in the code were what year the bike is.
meaning yours would be 04. mines right, stamped on the frame engine and swinger. everyone have a check and see if im right.
I found out mines 1998..


All times are GMT +1. The time now is 01:55 PM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.