Stomp z3 140 suspension height issues
 

Hi I'm new to this site so I don't know my way around or where to post, I'm having an issue with my Crf70 stomp z3 140, I've put a new shock in it (295)mm and the backend still sits so low! Also the seat etc dosent seem to fit right? I think maybe the rear subframe is bent? I'll leave links to pictures down below! Thanks!

https://i.imgur.com/1OopYtj.jpg
https://i.imgur.com/sJBA9U1.jpg

Re: Stomp z3 140 suspension height issues
 

It does look that the subframe is bent just after the stay.
What size shark did you take off in the first place as you may have needed a longer one to start with

I'm not sure what one It had on it when I bought it, but Iooked on the stomp specifications for the z3 and it says the standard shock is a 295mm so that's what I've put on it.. I'm unsure what to do now really

Re: Stomp z3 140 suspension height issues
 

I would have a look at a new subframe and see how bend your one is . The seat is definitely in stress the way it is fitted so if you're confident the shark is correct then it's the subframe that's the problem.

Re: Stomp z3 140 suspension height issues
 

Okay then I'll have a look at a new subframe, what do you think I should about the seat to get it to line up?

Re: Stomp z3 140 suspension height issues
 

I would unbolt the seat from the subframe and put the seat in the correct place and that may tell you how far out the subframe is as well.

Re: Stomp z3 140 suspension height issues
 

Yeah that's a good shout! I'll let you know how I get on thanks mate!