Pit Bike Club - New to mini moto, put unleaded petrol into 2 stroke with no mix :/

Pit Bike Club (https://www.pitbikeclub.co.uk/index.php)

- Mini Moto (https://www.pitbikeclub.co.uk/forumdisplay.php?f=65)

- - New to mini moto, put unleaded petrol into 2 stroke with no mix :/ (https://www.pitbikeclub.co.uk/showthread.php?t=77220)

Talish

13-02-2012 09:57 AM

New to mini moto, put unleaded petrol into 2 stroke with no mix :/

I recently got given a mini moto for free. Not knowing I had to mix the petrol with 2 stroke I just loaded the whole can into the tank. I got about 2-3 litres in there with no mix. Is this going to bust my engine or will I be able to run the tank dry and remember to mix next time? I can't measure how much petrol is in the tank so I can't do an accurate mix.

Please help :(

jon king

13-02-2012 10:07 AM

Re: New to mini moto, put unleaded petrol into 2 stroke with no mix :/

check pm

Dangle_kt

13-02-2012 04:06 PM

Re: New to mini moto, put unleaded petrol into 2 stroke with no mix :/

Drain it, add right amount of oil, pour it back in.

It'll take five minutes and save a shed load if hassle.

fenton158

19-02-2012 12:48 PM

Re: New to mini moto, put unleaded petrol into 2 stroke with no mix :/

dont even try and start it on just unleaded :banana:

spexx

19-02-2012 01:03 PM

Re: New to mini moto, put unleaded petrol into 2 stroke with no mix :/

If you dont like your mini moto engine then pull the pullstart. If you like your mini moto drain that fuel and mix it with 2 stroke oil. Cant remember the ratio but you cant go wrong with a 25:1 ratio (2.5Litres fuel : 100ml oil)

All times are GMT +1. The time now is 08:02 PM.