bolts,nuts etc
lets all chip in and make a sticky thread off as many of the nuts,bolt sizes etc on these bikes so we always got a quick reference to jump too:thumbs:
WHEELS ETC sdg sprocket fitment - m8 20mm long x4 top yoke nut m20 1.25 pitch? sdg disc bolts- m8 with 10mm soulder x4 ENGINE BOLTS cyclinder head nut- m7 fitment with 10mm head x4 clutch pressure plate bolts (yx) m6 x4 oil pump bolts (yx) 1xm6 33mm and 2x m6 40mm sump plug m12 1.50 pitch Top engine bolt is m8x130 z155 head nuts m8 x4 Z155 exhaust studs are M8 x2 YX160 bearing & seal sizes - 2nd gen Crank bearings - 22id x 56od x 15w Gearbox bearings - 17id x 42od x 12w - Will get the other bearing size when i get it out the case Gear shaft seal - 11.6id x 24od x 10w Kickstart seal -16id x 28od x 7w Sprocket seal - 17id x 29od x 5w HOSES carb hose/fuel sizes, vm26 overflows 5mm molkt overflows? pe28 overflows? fuel hose from tank to carb 5-6mm id CARBS- Keihin PWK 28 fuel hose is 6mm dia overflow is 4mm dia To suit 201 Needle - JFJ Jets - 105 Main & 38 Pilot ^ INFO FROM GT TUNING ^ |
Re: bolts,nuts etc
Quote:
|
Re: bolts,nuts etc
Quote:
yeah come on, lets get some usefull info on this thread,:thumbs: |
Re: bolts,nuts etc
ill edit the thread and keep it up to date with the bits any1 posts
|
Re: bolts,nuts etc
keep editing your first post i'll sticky it when it starts filling up :thumbs:
|
Re: bolts,nuts etc
Quote:
IM ON IT TEAPOT DUDE, :thumbs: |
Re: bolts,nuts etc
Top engine bolt is m8x130 vm26 overflows are 5mm
|
Re: bolts,nuts etc
z155 head nuts & exhaust studs are M8.
ignition cover bolts are M6 unsure of length. |
Re: bolts,nuts etc
Quote:
over :thumbs: |
Re: bolts,nuts etc
You the man
|
All times are GMT +1. The time now is 07:37 AM. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.