BOTM August 2014
 

bloody hell not on time are we..? :eek:


first 5 :thumbs:

Re: BOTM August 2014
 

My KLX 195!

Spec List...

**Motor**
- 05 motor with electric start boss removed,
- TB 55mm stroker kit,
- TB 67mm big bore kit,
- Takegawa 4 speed close ratio gearbox,
- BBR output shaft,
- Kitaco 4th gear drum,
- Takegawa HD oil pump,
- Takegawa +R superhead,
- Takegawa S25D auto decomp camshaft,
- Takegawa hydraulic clutch case kit,
- Takegawa 6 plate clutch kit with primary gear,
- Takegawa quickshifter,
- CHP bump start plate,
- Pro Circuit dress up kit,
- Pro Circuit gear lever,
- Keihin PWK 28,
- Polished ignition cover.

**Chassis**
- 03 Frame modified for linkage system,
- Aluminium linkage swingarm,
- 05 RM 85 Showa forks shortened 2inch,
- RM85 front brake system,
- FMF factory 4.1 exhaust system,
- FMF titanium heat shield,
- Racetech plastic kit in white,
- Custom graphics,
- Two Bros bash plate,
- Renthal Twinwall fatbars,
- ASV levers,
- Pirahna engine cradle,
- Magura hydro clutch master cylinder & ASV rotator clamp,
- Ribbed seat cover,
- Fastways pegbar & footpegs.
- Talon sprockets & Renthal chain.

http://www.pitbikeclub.co.uk/showthr...078#post913078


http://i33.photobucket.com/albums/d7...pshtafzgv0.jpg

http://i33.photobucket.com/albums/d7...pspn1yr9el.jpg

http://i33.photobucket.com/albums/d7...psu0rxmktr.jpg

Re: BOTM August 2014
 

My little 138+r aka the mbc slut...


Reegmx klx

New style Marzocchi front end
Reegmx Billet Hubs laced to Excel rims with HD spokes
Maxxis rubbers
Hayes mx front brake
Reegmx billet swing arm kit with fat elka
reegmx billet brake pedal
ASV levers
Sunline gear lever
Polisport Plastics with team FiddyForum.com graphics
Pivot pegs
Twobro HD peg bar
BigMinis style bash plate (not on yet)
Twobro oil cooler kit
Pro Taper bars
Renthal sprockets
Rear fender brace
Formula rear brake
Twobro high rise seat
SX 65 shock cover

KLX 138+R Engine
Takegawa 138+R Superhead bore kit fitted with ceramic coated cylinder
Takegawa 6 disc Cable Clutch with Primary gear and Kevlar clutch plates
CHP Billet 2nd Gear
CHP Bump start
Kitaco Heavy Duty Silent Cam chain
Kitaco Heavy Duty Out Put shaft
Kitaco Titanium Tappets
CHP Red Billet magnetic drain plug
CHP Heavy duty Shift detent to prevent breaking of pins
Takegawa Heavy duty 4 Speed shift drum
Takegawa VM26 carburettor and manifold
Pro Circuit Dress up kit
New Dual Pro Circuit Titanium Ti 4 pipes
New Pro Circuit Billet tips :cool:

Engine was stripped down to the bare cases and rebuilt from the ground up with all manufacturing/mould bits removed to aid oil flow around the engine.

All oil seals and bearings in cases were replaced with high quality Japanese bearings/seals then rebuilt with a balanced crankshaft and all new gaskets.

Attachment 25752

Attachment 25753

Attachment 25754

Re: BOTM August 2014
 

for the sake of helping.

http://i105.photobucket.com/albums/m...psmt1qtyny.jpg

yx140 engine with z40 cams,
1/4 turn throttle,
Whoop levers,
Whoop triple clamps,
Whoop bars + Apico grips
Twin pot front brake,
Sp forks,
Excel rims on cnc hubs,
Fastace rear shock.

Re: BOTM August 2014
 

D-link pro-line
Upgraded sp front shocks (factory)
Upgraded Dnm rear shock (factory)
Alluminium swing arm (factory)
Spx alloy wheels/spokes and hubs in red
Upgraded 57mm high comp tb barrel and piston =146cc
Pitster pro fuel cap.
Pitster pro fat bar clamps
Pitster pro chain guide
Pitster pro sump guard
Pitster pro seat
New green renthal grips and bar pad
Renthal fatbars
Whoop leavers
Fmf exhaust
Green fuel vent pipe
Rear brake upgraded to a rmz 450 master cylinder with green apico cap and venhill brake line
Vm26 mukini carb jetted correctly withe takegawa dress up kit and tb manifold
Upower stator cover
Upower oil cooler cover
Cr85 EBC 5 plate clutch
Aswell as upgraded graphics

Attachment 25755

Re: BOTM August 2014
 

D-link 177
Upgraded sp front shocks
Upgraded Dnm rear shock
Alluminium swing arm (factory)
Red cnc alloy wheels/spokes and hubs
Upgraded 63mm high comp barrel and piston
New Red Renthal bars high rise
Pro circuit T4 exhaust
Rear brake upgraded to a rmz 450 master cylinder with Red apico cap and venhill brake line
OKO 30MM Flatslide carb jetted correctly for the 177
Hustle side case
Upower twin oil coller conversion
Red carbon dipped tank and frame protectors
sintered brake pads
Red cnc 1/4 throttle
Red venhill front brake line and throttle cable
Rim locks fitted front and rear with kenda carlsbad tyres
Pitster pro rear axle and Red blocks
Red fairing bolts throughout
Pitster caliper and resevoir cover
NGK Iridium Plug and champion plug cap
Aswell as upgraded graphics

This is a few months ago spec has grown since but no new images to uplaod yet :(

Attachment 25756

Attachment 25757

Re: BOTM August 2014
 

go go go!

Re: BOTM August 2014
 

Linkers nice.

Re: BOTM August 2014
 

Craig's looks even nice now there old pics

Re: BOTM August 2014
 

Love a d-link