Hi guys, need help with the new engine. Using the old jincheng 50 loom.
even if you could tell me what wire goes to where on the CDI and coil.
basically heres the engine wiring. black wire. green wire. black/red wire.blue/white wire. yellow wire and lastly, white wire.
Two wires that I know of white and yellow are useless (for power) any ideas what way the others connect up?
off engine
and heres the wiring from the loom. Basically coil is in the wiring somewhere, and this all leads to the plug that fits into cdi. The jincheng plugged right into this no problems. But this engine wont.
yellow/red wire. black/white wire. black wire. red/white wire.
