Quote:
Originally Posted by kirky1991
You see, I'm sure my forks are the same as yours anyway ? 45mm fitment between bolt holes on the fork bottems ? Which i'm sure is like the standered fitment for the SDG bikes.... I had to get the original hole welded up drilled and retapped smaller, then a piece of ali welded on and drilled/tapped 13mm across to allow for the bigger disc!
|
Strange. Next time im in the garage I'll take some measurements.
I think the difference will be with the lugs them selves, and how far away from the axle they are.
The caliper is identical to yours, so it can only be down to the distance of the lugs on the fork leg, from the wheel axle.
Little update. Managed to get swing arm bearings from Ebay for £1.95 each.
My front tyre has just arrived today too. So I'm sorted with tyres.
Dunlop TT92 rear and Sava MC31 front. Should run okay.
Bought a pair of ally reinforced hand guards on ebay last night, along with a full bobbin kit, and talon rear sprocket from OOR.
Front sprocket is coming from Adam at PBS.
Gearing of choice is 16/39 on 12" wheels. It wants to be fecking right because I've bought top quality sprockets.
Will get some more pictures up as parts arrive.
Ben