Quote:
Originally Posted by liamisace123
so were could i get one that fits straight onto a 125
|
you cant put a 138 topend on your lifan 125 gearbox with the clutch directly attached to the crank.you have to buy a 140 conrod kit and have it pressed onto your crank,which means splitting your crank cases.if you have the lifan bottom end where the clutch is linked to the crank via a primary gear then you can replace the whole crank.the 138 barrel is 98mm long same as the 125 barrel.same ports too.like i say the onlyu problem is the gudgeon pin is 0.5mm too big for the little end on the conrod!!
dr pepper hasnt fitted this kit on a 125 he was just told it would fit when he bought it.