YX 160 4V Carb

[quimjuicemonkey]

adam does the manifold you will need aswell

[MiiTCH]

Originally Posted by quimjuicemonkey adam does the manifold you will need aswell

what manifold will i be needing?

http://www.pitbikeparts.co.uk/sleve-...old-p-704.html

that?

[quimjuicemonkey]

this will fit but you may need a spinner not sure it will clear frame he does a longer version that he dont list phone him up and hill sort you a filter may even stock jets good guy knows his stuff

[quimjuicemonkey]

saying that you could twist it but the longer manifold i think helps a bit

[MiiTCH]

Okay, well im going to have one last tinker with the carb ive got now, if that fails then ill sort out the new one

[Fiddyparts]

Mitch the max you need is a 28mm ie pwk or mikuni flatslide or roundslide anything more is just to much been there and done it with the v2 and the 4v with yx and z155 engines.

Hope this helps

[chace_110]

Originally Posted by Fiddyparts Mitch the max you need is a 28mm ie pwk or mikuni flatslide or roundslide anything more is just to much been there and done it with the v2 and the 4v with yx and z155 engines. Hope this helps

X2 with the pwk love mine!

[MiiTCH]

Originally Posted by Fiddyparts Mitch the max you need is a 28mm ie pwk or mikuni flatslide or roundslide anything more is just to much been there and done it with the v2 and the 4v with yx and z155 engines. Hope this helps

i'll be giving you a call soon then

[beechin]

tb28mm mate mine runs spot on i can give you soe rough settings if you want.

[James116]

I'm running 170cc 4 valve kitaco barrel and piston with a tb28 carb. pilot jet 50 and main jet is 150 and needle is middle