Go Back   Pit Bike Club > Pit Bike Discussion & Reviews > The Workshop

Latest discussions at Pit Bike Club:


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-06-2007, 09:09 PM   #1
Adam
Guest
 
Adam's Avatar
 
Posts: n/a
Flywheel/magneto related problem

Hi there, got this recent problem with my 125cc pit bike.

was just riding along when the chain came off, immediately cut the engine, the bike then refused to start and when i took the flywheel cover off, part of it (the bit that seperates the flywheel from the front sprocket) had snapped probably from the chain, and the mounts to the stator (bit thats next to the flywheel) have snapped. they seem fixable but I need the flywheel off so i can easily get to where they snapped.

now, i have a puller to get the flywheel off but the hooks (or w.e they are called) wont fit around the outside of the flywheel cause the gearbox case gets in the way and the gap is too small. i can post pics if they are needed.

i have considered other stuff like trying to lever the flywheel off but i dunno whether that will damage it. any advice on how to fix the stator mounts, or more importantly how to get the flywheel off?

Thanks in advance.
  Reply With Quote
 
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
magneto wiring problem help please manwee The Workshop 3 28-04-2012 11:57 PM
125 magneto problem mattwill89 The Workshop 0 17-02-2012 01:23 PM
magneto/flywheel cover Z3p Wanted 1 27-07-2009 06:59 PM
magneto/stator/flywheel help spozer The Workshop 2 28-02-2009 07:26 PM
magneto problem bandogge The Workshop 8 09-03-2007 01:45 AM