My rm 250 wont spark. When i bought it it had the cdi and coil so i bought a stator and flywheel from a breakers after i fitted the stator and flywheel i tried it there was power comin from the stator but when i tried to see if there was a spark there was nothing so the wire that goes from the cdi to the coil i tried to see if there was power comin from that as i have been told thats what moves the spark from the cdi to the coil (tell me if this is correct) but there was no power. So i bought a cdi from the same guy who sold me the stator and flywheel which came from a runnin bike and tried for spark.... nohing AGAIN so i checked the wire from cdi to coil and no power again and i really doubt both cdi's were fucked so is there something i could be forgettinng or missing out . PLEASE HELP ME
check how many volts are given out from your stator when you kick it over I had a kx 250 1992 model and everytime I took it out about 20 mins into the ride it just died and wouldnt start I replaced the cdi coil ht lead stator more or less everything and it turned out to be the coils on the stator so my mates dad re wired one of the coils (the blown one) and it ran again so check the wiring on the coils