Road Legal Lights/loom HELP PLEAASSEE

[spexx]

Video now on page 2 and 3 plus more help needed on page 3. Loadsa info on this thread if you trying to run some lights.
I really need help on this as I don't know were to start or anything plus the thread should help others in the future. So ...
With 4&1/2 months till summer, realised I got time to make my summer time road legal project fully kitted with lights plus indicators. (Also want less reasons for Pc Plod to pull me over)
So, got myself a wiring loom and rear light with indicators. Will be buying headlight and front indicators after I figure out what I've got here and how it works or how to connect things up.
The engine is a new 125cc Lifan Big Valve (12v) with 5 wires coming from it and 0 miles on the clock. I will update with pics to help in the future.
Currently connected to the original pitbike loom like this

This is the loom I just got and want to fit

So 1st I want to know what these important looking parts are.
What is this
1. Thinks it regulator... confirmed


2. tHE STARTER COIL right ???


3. wHATS THIS... number 3 is a starter solenoid for electric start models Confirmed

3. WHAT THE HELL IS IT...Starter solenoid


4. IS THIS THE CDI? Yes Confirmed White connector is for engine wires

CLOSE UP of cdi and 4 cut wires for ignition switch


Just answer as picture 3 or 4 is ...... (Thanks)
So understanding this loom a bit more and where to connect what
Starting from one end of the loom there's these coming of the main body of the loom

And again

So thats one end of the loom, what connects were lol??


Moving up the loom we have these

AND AGAIN


AT THE END OF THE LOOM

AND AGAIN, LOADS OF CONNECTIONS

Spark plug coil


So thats the loom. Handlebar switches on 1st picture.
What bit connects to my engine? The wires in the white plug next to the CDI.
Do I need A battery aswell?? No engine started on kickstart withoutr battery.
Were do the rear lights / headlights connect to?? To the matching wires.
This is all info i've learnt and will update as i learn more.

If i cant get help, i will just sell the loom, replace bulbs in rear light/reg plate bracket with bicycle L.E.D's and same for headlight to create a simpler setup lol. I dont know, i just need your help.

[Rob C]

yup top is regulator/rectifier, number 3 is a starter solenoid for electric start models

and yup thats the cdi too you got that right lol

looks like the wires have been cut on the actual controls/switches tho?

[skippy #247]

Originally Posted by Rob C

yup top is regulator/rectifier, number 3 is a starter solenoid for electric start models

and yup thats the cdi too you got that right lol

looks like the wires have been cut on the actual controls/switches tho?

the four wires that have been cut are meant to go to the ignition switch

[Davido]

From left to right:
Regulator, CDI is next to it.
Red/black = Battery connections
Connections for rear lights/indicators
Can't see the end of the connector but I think its number plate light
Rear brake light switch.

[jburton46]

on the red positive lead where there is the 2 connectors, they go into them white plastic fuse holders and hold a 15amp glass fuse

[jburton46]

here you go mate, not everything is 100% but id say 95 is all right.

[spexx]

Thnx so much Rob n Skippy. we getting somewhere
Yes the wires on the handlebar switches have been cut but am sure can fix that easily if i find out were they need to connect to?
are The 4 cut wires for the ignition switch needed if am using kickstart? Are they just left like that??
Do i need a battery?
Which wires connect to the engine wires?

[spexx]

thnx davido, you rock lol. really getting somewhere now

[skippy #247]

Originally Posted by spexx

Thnx so much Rob n Skippy. we getting somewhere
Yes the wires on the handlebar switches have been cut but am sure can fix that easily if i find out were they need to connect to?
are The 4 cut wires for the ignition switch needed if am using kickstart? Are they just left like that??
Do i need a battery?
Which wires connect to the engine wires?

you will have to join a couple of the wires to get it to spark but not sure which mate

[spexx]

Thanks a lot guys. cleared up a lot of questions. Still not 100% certain what am doing