Yx160 - Demon X -CRF70

[Luke_yx160]

[Luke_yx160]

[Luke_yx160]

Yesterday was a productive day all in all. Got to the bike back to just a bare frame, and cleaned up the motor. Got a list of the things that need replacing and a list of things that dont necessarily need replacing but I want to replace/upgrade................. A list as long as my arm
This how I planned on ending the day.....




Got abit carried away out in the garage and ended starting to rebuild the bike

[English Flob]

Looks like a very productive day...

[P77ASC]

Looks a nice bike mate.

[Luke_yx160]

Cheers guys. Will post a few more pictures later on.

[Luke_yx160]

Spent a bit of time Sunday evening cleaning the motor up. The bottom end was the original demon x grey which didn't take much cleaning bit of wd40 and a few rags but the barrel and head where a different story. The cast aluminium took a lot of engine degreaser, scotch pads, wire brushing, coffee and a fair portion of my Sunday evening but I am chuffed to bits with the outcome. Well worth the time and effort.

Here's the before pictures




These pictures were taken after the first clean using the pressure washer and bike cleaner so you can see how shitted up the top end was.

And the after pictures, also cleaned the frame up and bolted the engine back in.

[Crusty888]

Impressed with your results!!

Keep them comming

[English Flob]

Looking really good, I might do mine.... when it gets dirty

[Luke_yx160]

Been a while I know since any updates. They bike is slowly going back together now. lots of new parts and lots of cleaning. The list of new parts are :

New molkt 26mm carb jetted as recommended by OORacing
New DNM hornet rear shock
New extended alloy swingarm
New axle bolts front and rear
New 1/4 turn throttle
New whoop racing gear lever
New throttle and clutch cable in renew hiflo oil filter
New cdi
New updated coil and lead
New renthal chain
New rear chain guide

There's probably more but that's all I can think of off the top of my head. Also got more parts awaiting delivery, these are

New front and rear wheel sticking with the original 14" and 12" both SDG hubs
New brake and clutch levers
New front and rear venhill brake lines in black

Photos to follow