Kill Switch!

[Reedy8]

Yeeeeeeeeeeeeeeeeeeeeeeeeeeeew! im in the process of upgrading, i have installed a new z155 engine wired everything up apart from the kill switch. When the kill switch is not connected i get a big spark, and when i connect it i get a really really weak spark, please does anyone know what this could be?

Cheers!

[pat=rat_41]

kill switch sticken, bad earth, or shorted out some where

[Reedy8]

its got a good earth ive bolted it tight to the frame not sure what to do

[Kentiish-lad]

Originally Posted by Reedy8

its got a good earth ive bolted it tight to the frame not sure what to do

if your not bothered about running a kill switch just take it off and if u need to kill the engine put it in gear and let the clutch out to stall it

[Reedy8]

na i wont do that i would much rather use a kill switch its just trying to find the problem

[Kentiish-lad]

Originally Posted by Reedy8

na i wont do that i would much rather use a kill switch its just trying to find the problem

tryed another kill switch ? could have a poor connection somewhere

[Reedy8]

it work fine when i had my yx140 in, its just randomly starting doing it, the whole electrics are brand new so i dunno, ill have a look tomorrow, check the earth maybe bolt it somewhere else and then check for lose wires,

cheers lads.