lifan 110cc stator replacement

[danm89]

My first post here, and probobaly going to be stupid.

I've just got a bike with what I'm sure is a Lifan 110cc engine, electric / kick start. As in this video https://www.youtube.com/watch?v=8UshzMAQxRg

I'm replacing the stator, and when i removed the case with the stator attached, 2 rubber pads came out, and i cant for the life of me figure out where from. I've tried googling but all i can find is instructions on replacing a stator that sits behind the flywheel.

Can anybody help out and let me know what these pads are or where they are from so i can put this thing back together?

[Mountain RFZ]

hey sit depending on size, on the middle thing or behind the screws.

Put a pic up of them as its just a guessing game atm but it should appear quite obvious where they go.

Middle crank or screws.

Its to seal the stator up so no oil comes out.

[Cagiva4ever]

"rubber pads" sound odd. are you pointing into rubber O-rings x2 ?

located behind stator plate, on the Stator plate's x2 M6 screwthread holes at the engine casing. these are showed pointed out on many Youtube vids 4example, so have a look at Youtube 4example, if no personal sample photo to show.

[Mountain RFZ]

Originally Posted by Cagiva4ever

"rubber pads" sound odd. are you pointing into rubber O-rings x2 ?

That's what I assumed

[danm89]

20161230_103623.jpg

20161230_103628.jpg

Should be able to see them in those photos. The stator was attached to the inside of the case, so i didn't have to remove the flywheel or anything, just like in the video i posted above. Unfortunately these came out of place as i was lifting the case off (with stator attached) so didn't see where they come from. Because of the metal tabs they will just stick themselves anywhere, no one clear place to put them back.

I've watched videos but they are all for the 2 coil type plates that sit behind the flywheel.

[Cagiva4ever]

doh, sorry. totally overlooked that E-starter being mentioned...as a sign of engine model...

.................................................. .
EDIT:
*i will re phrase, most likely a sliders/"tensioners" for the Startermotor chain, as the chain hasnt got any automatic tensioner, hence when it streches it whips loosely.....can even jump a teeth as the chain is like 8mm pitch summink tiny...E-starter is summink 70~150watts with gear reduction, so there is enough Torq to jump and miss a tooth and rattle....hence most likely they rubber pads are for it...

.................................................. ........


Those rubber pads might be a some sorta Chain slider/protector for the Flywheel cover casing. theyr just pinched between cover casing and engine casing...

iirc none of my 73cc or 90cc E-starter Lifan type engine have them. wasnt a stock item even on my ex Kazuma-lifan 90cc atv.

These Monkey type china engines are weak for Jumping Chain, that destroys casings etc.. With the cheese soft original chain or-and loose slacky chain. even the kmc "heavy duty" chain is crap.