bore kit for 125cc

[physco_nutcase_danny]

Originally Posted by matt132006

yh i no lol.. im on about 140 barrel and piston.. it longer stroke than 125

matt are your talking about the lifan 140 engine?im talking about the 138cc kit which was posted at the start.

[themountain]

Originally Posted by physco_nutcase_danny

THEMOUNTAIN LOOK AT BOTH LINKS...BOTH BARRELLS ARE 98MM IN HEIGHT..

this are both thumpstar barrels and the douchebags from petrolscooter measured the sleeves... this things have nothing to do with the actual Lifan140 barrel we are talking about here!!
thumpstar cylinder--->78mm
Lifan140 cylinder---81mm

[themountain]

Originally Posted by physco_nutcase_danny

..
125 piston is 52.4mm and 138 piston is around 56mm which makes up for the fuel displacement.the stroke of the crank has no effect on the cc as there both the same length.

BUAHAHAHAHA...that made my day!!!:ico n_lol:...you are a true expert...

[dannyb]

imsure dr pepper didnt intentianally sell you it knowing that it wouldentfit. i think its just a mistake on his part.

[katoom]

Like simms16 said, just get a bigger engine. The money you spend on a BB kit, possibly a carb, then probably have to uprate the clutch, you might as well sell your lump and buy a bigger one complete.

[liamisace123]

Originally Posted by physco_nutcase_danny

liam send me a pic of the right hand side of your engine then i will be able to tell you if it will fit or not...

here is the whole engine

[katoom]

I'm sure that engine has a 54mm bore and stroke (got 54 in the engine number) but you can't be 100% certain till you strip it down.

I had that engine, the clutch is very light, will probably slip with any increase in power, also the carb is quite small. I just sold my engine and bought a bigger one

[physco_nutcase_danny]

Originally Posted by themountain

this are both thumpstar barrels and the douchebags from petrolscooter measured the sleeves... this things have nothing to do with the actual Lifan140 barrel we are talking about here!!
thumpstar cylinder--->78mm
Lifan140 cylinder---81mm

this thread is about 138cc kit NOT lifan genuine 140cc barrell.

[physco_nutcase_danny]

Originally Posted by liamisace123

here is the whole engine

140 crank wouldnt fit in that bottom end because your clutch is directly attached to your crank.splines different on the 2 cranks.

[themountain]

Originally Posted by physco_nutcase_danny

this thread is about 138cc kit NOT lifan genuine 140cc barrell.

no the question was if a genuine 140 barrel and piston fit on a lifan125 and it won`t , brother....don`t change the subject...you were wrong