bore kit for 125cc

[physco_nutcase_danny]

Originally Posted by themountain

no the question was if a genuine 140 barrel and piston fit on a lifan125 and it won`t , brother....don`t change the subject...you were wrong

VERY FIRST QUESTION OF THIS THREAD.

hi were can i get a bore kit for a 125cc lifan engine and does it make it 138cc ?? thanks

WHAT HAS THAT GOT TO DO WITH A GENUINE 140 LIFAN BARRELL?

the bore kit is 138cc different to the 140cc lifan barrell as the stroke of the crank makes up for the cc as its longer...READ THEMOUNTAIN.

[themountain]

Originally Posted by physco_nutcase_danny

depends on which bottom end you have....if you have the bottom end where the clutch is attached directly to the crank then the 140 kit wont fit as the little end is too small for the piston.the barrell and head is a straight fit though.so the only way round it is to get a 140 conrod kit pressed onto your 125 crank.you cant replace the 125 crank for a complete 140 crank as it wont fit.the 140 crank is for the gearbox where the clutch is attached via a primary gear.not directly to the crank.

this is your first remark on the question...do I miss here something.???...you clearly babble about a "140 kit"...or not..???...give it a rest now...you obviously don`t remember or know what you are talking about

[physco_nutcase_danny]

Originally Posted by themountain

this is your first remark on the question...do I miss here something.???...you clearly babble about a "140 kit"...or not..???...give it a rest now...you obviously don`t remember or know what you are talking about

when have i ever said im talking about a 140 genuine lifan barrell?im talking about the 138 kit.did you not see the pics for the 138 barrell and 125 barrell?YOU DONT KNOW WHAT YOUR TALKING ABOUT.

TELL me when you stripped down a 125 lifan and tried fitting a gen 140 barrell and then a 138 kit... NEVER..YOUR FULL OF ****.ALWAYS TRYING TO MAKE OUT YOU KNOW EVERYTHING WHEN YOU CLEARLY DONT...