Stomp KZR parts

[stuartornum]

Hi,

I recently bought a second hand 2009 Stomp KZR (it's definitely an kzR).

I stripped it down to the individual parts and going to rebuild replacing knackered parts as I go.

Could someone please let me know what type of bearings the swingarm is supposed to be i.e. 6000, 6001 or 6200?

Any preference on who to use to get replacement parts from? I emailed Fiddyparts and Funbikes a few days ago - got a response from Funbikes (thank you) still waiting on Fiddyparts...

Cheers

[mattiepatty]

Swing arm is smaller i think .... Will check in morning if can get u some low fiction ones .... Or maybe skippy can help as I give home some swinger arm bearings a while back ...

[stuartornum]

Originally Posted by mattiepatty

Swing arm is smaller i think .... Will check in morning if can get u some low fiction ones .... Or maybe skippy can help as I give home some swinger arm bearings a while back ...

Great, thanks - I'm after quite a few things, would be interested to see if you think certain bits are worth the upgrade.

Clutch cable
Throttle cable
CNC throttle (worth getting CNC?)
Gasket set
Chain + chain roller
Axles (front and rear)
CDI unit and wiring loom (High performance rev one..?

Ideally I'd like to replace every single nut, bolt, screw, washer, axle - but having some issues finding people who stock everything....

Cheers

[mattiepatty]

I got new axels from welsh pitbikes as the sps forks on kzr has build in spacer .. Look for a Daytona quick action throttle that will give u cable throttle NAND new grips .... Ur top engine bolt is a m8x130 any hardware shop has them ...

[skippy #247]

if you measure your bearings mate ill check these that i have for you

these are 6001-2rsh/c3

[stuartornum]

Originally Posted by mattiepatty

I got new axels from welsh pitbikes as the sps forks on kzr has build in spacer .. Look for a Daytona quick action throttle that will give u cable throttle NAND new grips .... Ur top engine bolt is a m8x130 any hardware shop has them ...

Will do, thanks! I'm planning on replacing all bolts with allen key style where possible

[JordyRoo]

wouldnt bother with a high rev CDI.