That would be me then!!!!!
That is exactly the turbo I’m using Its from a small Mitsubishi. In my opinion Ferg went for a far too complicated set up with his monkey resulting in many potential hurdles to overcome mine is a much simpler draw through system, see below.
yes your the chappie...couldnt remember who it was...so have you got the engine running with the turbo fitted?
that looks fantastic Hastiekid we need vids when its running
i think it is possible but will always be laggy, from memory the turbo is actually from a ride on lawn mower did'nt ferg use a smaller cc engine too? with your 165cc i think you have a better chance of making it work
that looks fantastic Hastiekid we need vids when its running
i think it is possible but will always be laggy, from memory the turbo is actually from a ride on lawn mower did'nt ferg use a smaller cc engine too? with your 165cc i think you have a better chance of making it work
My engines not up an running yet, it needs a bit of ally welding on the intake manifold, new piston needs decking to lower compression and I’m looking for a programmable CDI to ****** the ignition then ill do the ceramic coating on piston, turbo and exhaust. I might do the piston over the weekend if I can be bothered.
Incidentally OOR are in the middle of a turbo build at the moment and there is a turbo monkey on ebay, see below.
That’s a very interesting set-up does anybody know what that head is as it appears to be running upside down to a conventional head I.e. intake at bottom and exhaust at the top.
That’s a very interesting set-up does anybody know what that head is as it appears to be running upside down to a conventional head I.e. intake at bottom and exhaust at the top.
hes set that turbo up wrong...hes bolted the turbo exhaust intake to the fuel inlet on the head.
he needs to turn the turbo round and manufacture new pipes...
hes set that turbo up wrong...hes bolted the turbo exhaust intake to the fuel inlet on the head.
he needs to turn the turbo round and manufacture new pipes...
always some eh???
That’s SOOOOOO FUNNY……..I wonder when he realised his mistake or if he ever tried to start it.
On closer examination he has other issues. It appears he has attempted to fit a dump valve in the system, this is totally useless in a suck through setup……Nice carb though.
That’s a very interesting set-up does anybody know what that head is as it appears to be running upside down to a conventional head I.e. intake at bottom and exhaust at the top.
I can tell you that the bottom end is a Honda Nice, so maybe worth having a search for what top ends fit them
we need vids when its running 
did'nt ferg use a smaller cc engine too? with your 165cc i think you have a better chance of making it work
Linear Mode
