this is how i am so far in terms of the road legal build
Spec (as of now):
CRF SDG Cradle Frame & swinger £70
Fastace BS58RCL Remote Reservoir Shock £100
WPB Mags £145
Stomp CRF Seat £17
SDG Uprated Rear Brake £35
Wirtz CRF Bars £40
Wirtz 1/4 Turn Throttle £40
15mm Spindle & Crash Bobbins from PBS £37
Acerbis Headlight £FREE
Still Waiting On:
Front Brake £31
Brake Disks £28
White Plastics £20
Currently saving for a stomp 140 engine which should be about next week ish
what do you think?
& yea its being built in my spare room XD
Forks Came today but they were for a 5.5" headstock & mine is 6.25", so i had to bit of modding to make them fit. i already had a set of forks for a 6.25" headstock but the yokes were bent so i removed the 6.5" headstock bolt from the bent yokes and removed the headstock bolt from the fastace yokes & put the 6.5" bolt into the fastace forks, it didnt fit as well as i'd expected but it will do for the time being until i can have a longer one machined for them.
Finally got them to fit properly
These forks are fooking beautiful! but they are a bit to soft and spongy for SM/ Road use so may have to add a little oil to stiffen them up!
Heres the only problem with them now, on the headstock bolt i have fitted the is a 0.5mm step and the bottom of the bolt which is not allowing the bearing to fully go down the bolt so thats why im having a longer stem bolt made up using the original fastace one as reference.
Now fitted front brake which is a really tight fit! you have to kindo of shimmy the disk over when its on the wheel on the forks and slip the brake in and then align this disk back up and bolt it back on & also trial fitted the mags
... anyway more pics!
& just ordered my 140 engine from stomp
Its going to be one sexy little bugger XD
Tank & foot pegs & pegbar came through today, trial fitted the tanks and tank shrouds.
also a mock up of the headlight.
Got the engine through yesterday and some other bits and bobs
Update:
Bought and fitted an OORacing x11 exhaust
-Dave.
Linear Mode
