Quote:
Originally Posted by physco_nutcase_danny
thats a bit tight 0.08/.003 inlet
0.10/.004 exhaust
ideally wants to be 0.08/ .003 inlet
0.13/ .005 exhaust
following the 2 gap rule  |
Right, I'm trying to understand what you mean here.
do you mean my inlet tappet should be 0.08mm +/- 0.003mm tolerance and my exhaust tappet should be 0.13mm +/- 0.005mm tolerance or am i getting confused with what you have put?
Edit: Ohhh sorry think I get it, Do you mean either 0.08mm or 0.003inches so 3 thou inlet?
and 0.13mm or 5 thou exhaust?
Linear Mode
