standard yx140 molkt carb settings

[Jackcrompton]

Can anyone who has a standard yx140 with a molkt carb tell me what settings you have on your carb such as needle setting and air and fuel screw how far out ? just so i can have a rough guess when trying to sort mine out im having trouble getting it set right

[ashert]

Originally Posted by Jackcrompton

Can anyone who has a standard yx140 with a molkt carb tell me what settings you have on your carb such as needle setting and air and fuel screw how far out ? just so i can have a rough guess when trying to sort mine out im having trouble getting it set right

mee too mate i cant get it right , is your acceleration really lumpy on yours, i was gonna sac it off and get a mikuni, what do you think mate

[Jackcrompton]

mine would run but just over fuel now it just wont idle and backfires and does loads of bogging i tried the 26mm mikuni not the £100 vm26 just a £25 quid one and that was worse ! so went back to molkt im just going to take it to a shop and get them to do it if not fork out the £100+ for a vm26

[Jamieleo]

good starting point screw mixture right in then half a turn out, set idle screw high then ajust down until you get ya nice tick over, give that a blast, also try cleaning carb etc too just in case these crap in it?

[Jackcrompton]

will i be able to try sort it with no filter ? mine ripped so binned it

[mattiepatty]

Any you guys try the vm22 ? 105-107.5 jet and she's spot on ...

[AEROHOT BOB]

Look in:
Workshop
3rd sticky down carb setting
Shows you all you need to no