|
Latest discussions at Pit Bike Club: - Caesars Benefit Code FANNATIONFULL Gets $1, 250 fo...
2 clubs off to frustrating beginnings to the 2023 Big league Baseball season, the Chicago Cubs and San Diego Padres, ... - 88cc build
In the process of building an 88cc from a 50cc engine,( im bored !) Can they run on a flat top piston ? and can you use... - epicmoto help
does anyone know where i can get replacement parts for an electric pitbike ?
please email me...
|
09-02-2009, 11:32 PM
|
#11
|
Super King
Join Date: May 2008
Location: aberdeen, scotland
Age: 30
Posts: 1,858
Bike: custom beast =]
|
Re: again no spark.
Quote:
Originally Posted by Dam_Buster
Right well, i checked the stator, and its returning over 100 ohms,
so its working alright, i have checked within the loom and its saying its all good too.
could i check for a short to earth by putting one side to the wires, and one side to the engine? as surely a short to earth, would go through the engine?
would this work?
JIM
|
i think it would mate .. but im not 100% sure
|
|
|
09-02-2009, 11:51 PM
|
#12
|
Track Master
Join Date: Nov 2008
Location: Northfleet, Gravesend.
Age: 36
Posts: 458
Bike: CRF70 140 S/M
|
Re: again no spark.
right just checked all the wires through the cdi plug, to earth *engine*, and the only one not to earth was the black/red wire.
can anyone tell me what this is used for?
i have 5 wire type stator,
blue/white,
green,
black/red,
white.
yellow.
|
|
|
10-02-2009, 04:23 AM
|
#13
|
superpit1337
Join Date: Oct 2006
Location: England
Age: 36
Posts: 20,508
Bike: CRF70/CRF50base
|
Re: again no spark.
Quote:
Originally Posted by Dam_Buster
right just checked all the wires through the cdi plug, to earth *engine*, and the only one not to earth was the black/red wire.
can anyone tell me what this is used for?
i have 5 wire type stator,
blue/white,
green,
black/red,
white.
yellow.
|
only green then either yellow or white shud be earth types. anyway black/red is live
|
|
|
10-02-2009, 07:33 AM
|
#14
|
Track Master
Join Date: Nov 2008
Location: Northfleet, Gravesend.
Age: 36
Posts: 458
Bike: CRF70 140 S/M
|
Re: again no spark.
what i mean is, they all go to the stator, which is connected to teh engine,
so they all earth to the engine really,
but i get nothing from the red/black.
so my live could be faulty?
|
|
|
10-02-2009, 07:39 AM
|
#15
|
Super King
Join Date: Dec 2008
Location: South Africa
Age: 37
Posts: 1,350
Bike: Yamaha SRX
|
Re: again no spark.
Quote:
Originally Posted by Dam_Buster
what i mean is, they all go to the stator, which is connected to teh engine,
so they all earth to the engine really,
but i get nothing from the red/black.
so my live could be faulty?
|
If they were all earthed within the stator then there would never be a potential difference to drive the current... Im nt sure what the colour coding is, if you post a diagram of where each wire leads i can help tho. Im sure Despise can do it off-hand.
|
|
|
10-02-2009, 11:06 AM
|
#16
|
Track Master
Join Date: Nov 2008
Location: Northfleet, Gravesend.
Age: 36
Posts: 458
Bike: CRF70 140 S/M
|
Re: again no spark.
i hear what you mean, spoke to adam this morning, and he confirmed that the red/black wire isnt a constant wire,
and can only be tested with a peak tester.
i will post up a loom diagram later when at home.
i will just split it all back down to basics, and check every connecter to make sure its not bridging/earthing anywhere.
adam also said that the cdi could have a bent terminal and to check that.
im sure its going to be a very simple fix, but its a brain melt all the same!!
will update later, and see how i get on.
grrr poxy wires!
|
|
|
10-02-2009, 12:13 PM
|
#17
|
superpit1337
Join Date: Oct 2006
Location: England
Age: 36
Posts: 20,508
Bike: CRF70/CRF50base
|
Re: again no spark.
Quote:
Originally Posted by Dam_Buster
i hear what you mean, spoke to adam this morning, and he confirmed that the red/black wire isnt a constant wire,
and can only be tested with a peak tester.
i will post up a loom diagram later when at home.
i will just split it all back down to basics, and check every connecter to make sure its not bridging/earthing anywhere.
adam also said that the cdi could have a bent terminal and to check that.
im sure its going to be a very simple fix, but its a brain melt all the same!!
will update later, and see how i get on.
grrr poxy wires!
|
did i skip or what you ment to be replacing the stator?
|
|
|
10-02-2009, 12:21 PM
|
#18
|
Super King
Join Date: Dec 2008
Location: South Africa
Age: 37
Posts: 1,350
Bike: Yamaha SRX
|
Re: again no spark.
Just had a reread through the thread. You say the yellow and white wire hav continuity with ground? Coz that should nt happen. There should be very low resistance between the wires and massive/infinity resistance for either wire to ground. Im nt sure but i think the generator shorting to ground could effect the pick up coil and excitor coil. Electrics arnt my strong point so pls correct me if im wrong. Iv got a diagram here that says the pickup coil, redblack and bluewhite, should hav 170ohm and for my yamaha its 184-276ohm, how much over 100ohm is yours? Would be useful to get figures from people running your stator to be sure.
|
|
|
10-02-2009, 01:24 PM
|
#19
|
superpit1337
Join Date: Oct 2006
Location: England
Age: 36
Posts: 20,508
Bike: CRF70/CRF50base
|
Re: again no spark.
red/white goes to the CDI and thats it.
the colour match is near the bottom of the page hooperimports wiring diagram
|
|
|
10-02-2009, 02:04 PM
|
#20
|
Join Date: Jan 2009
Location: blackwood near cardiff
Age: 29
Posts: 63
Bike: kx80
|
Re: again no spark.
hey mate the coil might be gone
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
No spark or weak spark!!!
|
mrbluee |
Pit Bike Discussion |
12 |
06-06-2014 03:22 PM |
spark
|
dale_brah |
Pit Bike Discussion |
4 |
13-06-2009 08:01 AM |
no spark
|
mechie |
Moto-X |
7 |
28-05-2009 08:44 PM |
new cdi still no spark
|
stevieITR |
Pit Bike Discussion |
18 |
08-05-2009 10:12 PM |
no spark
|
patto |
The Workshop |
18 |
14-07-2008 09:50 PM |
|