Pit Bike Club

st500 · 24-07-2009, 06:44 PM

hi

i have a 125cc pit bike, its the older style, about 2 years old id say, its just the kick start version, no battery etc but im wantin to put a light on the front so need to get a 12v supply.

ive removed the plastics and found a green 6 pin plug near the back of the bike, the wires come from the side casing, do i just need to get a voltage regulator to plug in to the spare plug or is it more complicated than that???

thanks

tom

**Despise** · 24-07-2009, 06:49 PM

Quote:

Originally Posted by st500

do i just need to get a voltage regulator to plug in to the spare plug or is it more complicated than that???

thanks

tom

more to it than that. have a look through these > http://pit-source.kicks-ass.net/viewtopic.php?id=123

and this one > http://pit-source.kicks-ass.net/viewtopic.php?id=269

st500 · 24-07-2009, 06:52 PM

the only bit that looks familiar is the yellow and white wire a have spare aswel!!

arggg!!!! i thought this would be easy aswel!!

**Despise** · 24-07-2009, 06:56 PM

Quote:

Originally Posted by st500

the only bit that looks familiar is the yellow and white wire a have spare aswel!!

arggg!!!! i thought this would be easy aswel!!

it easy, relax. yellow & white from stator go into regulator ( check the regulator diagram) then the other 2 pins add wires onto there, 1 is earth the other is live. take the live and put an inline fuse 10A or 15A (amp) so if the regulator fails it wont blow the headlight and thats it your done

st500 · 24-07-2009, 07:01 PM

Quote:

Originally Posted by Despise

it easy, relax. yellow & white from stator go into regulator ( check the regulator diagram) then the other 2 pins add wires onto there, 1 is earth the other is live. take the live and put an inline fuse 10A or 15A (amp) so if the regulator fails it wont blow the headlight and thats it your done

ahhhh thats ok then, so all i need is a 4 pin regulator???? ive got the light and wire etc

thanks for your help

tom

**Despise** · 24-07-2009, 07:21 PM

Quote:

Originally Posted by st500

ahhhh thats ok then, so all i need is a 4 pin regulator???? ive got the light and wire etc

thanks for your help

tom

yes^. then just a mater of looking at the diagrams so you get the wires on the correct pins. again dont forget to put an inline fuse on the live