Neeed Help How Do You Fit

[thump*]

skatebord wheels as boobins on a thumpstar pro elite any iders ????

[Rubber]

On my sikk mx me and my dad moved the back wheel forward slightly in the swing arm so that there was room for a bolt to go through the back of it.



Then just put a bolt and nut through the skate wheel and the arm tighten it up and then your done!

Hope that helps.

Tom

[Dangle_kt]

or you could take the rear axel bolt to a GOOD DIY shop/ motor factors and ask them for a longer bolt, then simply thread the wheels on as if they were washers in the whole rear axle assembly.

The only problem I can see with rubber's way of doing it is that you loose alot of movement in the rear wheel for tightening your chain, and also it wouldn't work on the front, I think my idea would - but I have never tried it..so I don't know for sure.

HOW TO: to follow once my bike arrives, so watch this space over the coming month!

[Dangle_kt]

Oh just thought - the reaon you have to take the bolt to the shop is that all bolts have different pitch's - the thread is different on different bolts. you have to get the same diameter bolt, same pitch but longer length.