How to remove valves, Made Easy

[Alan CF]

Hi all, made up this little tool to remove the valves, keeps your hands free to
try and get the collets in place, job done in seconds.

Remove rocker pin and rocker, (retain rocker pin as you will need it)



slide tool over valve and slide rocker pin back in to its hole and through
the valve tool,



Tighten down on the thumb turn and it pushes the valve spring down,
leaving both hands free to catch collets,

[skippy #247]

cracking little tool you made there mate

[Dangle_kt]

Top job. I use a welding clamp and socket with a window cut out of it. Yours is neater but mine leaves two hands free too.

[Alan CF]

Thanks all,
Might knock a few up if people are interested, but dont want to infringe on forum rules,

[Dangle_kt]

you could make them, list them on gumtree or ebay and link to the advert. It's only direct selling which isn't allowed.

[Alan CF]

Thanks. will do the ebay method. Unless anyone local wants to collect.
Or if theres a local bike run i could pop along.
Matlocks not far.
thanks all.
something to tinker with down the shed.

[Alan CF]

Got 5 knocked up, will get them on the bay asap.

[Alan CF]

Ebay link...


http://www.ebay.co.uk/itm/1311070583...84.m1555.l2649