Pit Bike Club

Bannon · 23-10-2010, 07:18 PM

Opinions on a VFR400 NC24 as opposed to an NC30??

physco_nutcase_danny · 23-10-2010, 08:23 PM

i know the chassis are completely different.as for the engines the nc24 has a 180 degree crank and nc30 has 360 degree crank.also the cams have different profiles and the nc24 uses tappets and nc30 uses shims.the nc24 has an oil cooler fitted where as the nc30 dosnt.nc24 uses 4 ignition coils and nc30 uses 2.the speedo is driven off the front wheel on the nc24 but driven off the front sprocket on the nc30.exhaust systems are different on both bikes same as the body work ect.

the better bike out of the 2 is the nc30

Bannon · 23-10-2010, 08:27 PM

Thanks danny, i am very tempted by an nc30 unless i can get my hands on a GSXR srad

lovely one for sale nesr me but i think it will be sold before i get the money off my grandads car

Bannon · 23-10-2010, 08:37 PM

This is the one, i dont think it will sell tonite but i would snap it up if i hand the money

http://cgi.ebay.co.uk/1997-SUZUKI-GS...#ht_1517wt_922

physco_nutcase_danny · 23-10-2010, 08:38 PM

id go srad mate,600 wouldnt go bigger than that for your first bike,enough power until you get used to it.

Bannon · 23-10-2010, 08:41 PM

Yeh, anything above 600 is very hard to restrict aswell, the most i have rode is a wr450 and that was evil so i think 600 is as far as i could go without killibg myself

Gsxr srad 600 woukd be the dream bike but i am happy with anything really