|
Magneto stator Wiring problem
Hello, I have a problem with the wiring of the engine harness, I have 5 cables coming out of the magneto, but the colors are different from those in the diagrams
Namely
There are 5 cables coming out of the engine
Black with a red dash
Green with a white dash
Yellow
Pink
Blue with a white line
On all the diagrams I have found there is a white cable and in my case there is not one
The module has a CDI and it is 100% a matching module because the quad previously worked on it, but the installation did not contact.
In the new harness there are such cables:
Green - ground
Blue with white dash -> module
Red with white -> module
Two yellow ones that do not connect
One goes to the regulator
The other one also goes to the regulator
Does anyone know how to connect them? Which cable is from what?
Alternatively how to check them?
|
Linear Mode
