Stomp z3 140 suspension height issues

[Seanjames]

Hi I'm new to this site so I don't know my way around or where to post, I'm having an issue with my Crf70 stomp z3 140, I've put a new shock in it (295)mm and the backend still sits so low! Also the seat etc dosent seem to fit right? I think maybe the rear subframe is bent? I'll leave links to pictures down below! Thanks!

https://i.imgur.com/1OopYtj.jpg
https://i.imgur.com/sJBA9U1.jpg

[Rickwales]

It does look that the subframe is bent just after the stay.
What size shark did you take off in the first place as you may have needed a longer one to start with

[Seanjames]

I'm not sure what one It had on it when I bought it, but Iooked on the stomp specifications for the z3 and it says the standard shock is a 295mm so that's what I've put on it.. I'm unsure what to do now really

[Rickwales]

I would have a look at a new subframe and see how bend your one is . The seat is definitely in stress the way it is fitted so if you're confident the shark is correct then it's the subframe that's the problem.

[Seanjames]

Okay then I'll have a look at a new subframe, what do you think I should about the seat to get it to line up?

[Rickwales]

I would unbolt the seat from the subframe and put the seat in the correct place and that may tell you how far out the subframe is as well.

[Seanjames]

Yeah that's a good shout! I'll let you know how I get on thanks mate!