New to mini moto, put unleaded petrol into 2 stroke with no mix :/

[Talish]

I recently got given a mini moto for free. Not knowing I had to mix the petrol with 2 stroke I just loaded the whole can into the tank. I got about 2-3 litres in there with no mix. Is this going to bust my engine or will I be able to run the tank dry and remember to mix next time? I can't measure how much petrol is in the tank so I can't do an accurate mix.

Please help

[09taylol]

Originally Posted by Talish

I recently got given a mini moto for free. Not knowing I had to mix the petrol with 2 stroke I just loaded the whole can into the tank. I got about 2-3 litres in there with no mix. Is this going to bust my engine or will I be able to run the tank dry and remember to mix next time? I can't measure how much petrol is in the tank so I can't do an accurate mix.

Please help

Do not start your bike because that will screw it up, drain the tank into a bottle, shake the bike or lean down on side to get ride of fuel in system, then measure how much is in the bottle of fuel

[Talish]

Originally Posted by 09taylol

Do not start your bike because that will screw it up, drain the tank into a bottle, shake the bike or lean down on side to get ride of fuel in system, then measure how much is in the bottle of fuel

I already had it running for half an hour or so after filling with unleaded.

[mo/ka/nic]

just take the fuel out mix with t2 then fill in back up as lon as it ran last time it will run this time dun it my self loads of times

[Talish]

Originally Posted by mo/ka/nic

just take the fuel out mix with t2 then fill in back up as lon as it ran last time it will run this time dun it my self loads of times

I have no way of draining the tank it's a bad chinese mini moto.
Would I be okay to pour some oil into the tank?

[mo/ka/nic]

yes but try do it fast so the oil dont go strate doen the fuel pip and plock carb then shake the bike well