Custom Crankcase Breather, I made today! And how you can do it

[CrazyCustoms]

I used:

- Deodorant can
- Hose
- Cable ties
- Polini, mini moto air filter
- Tools

Firstly this was the idea I had, why not add a filter onto my normal basic breather:



I then shortened the hose, widened the breather hole and put the hose through the opposite way to normal:





I then went on spending a lot of time working out how to fit the filter to the other end and in the end used a jubilee clip(not shown), and put a hole through the hose inside and the 90degree turn bit, and put a cable tie through:



The finished product:





Toby