help with monster motor gull arm

[thugwithissues]

Originally Posted by Ollie Shineray 50

i once ran an 800lb spring with my shineray frame with mk1 swinger and it was literaly solid unless you jump on it, so thugwithissues you dont wanna be going any heavier than binge says

ok good job i asked about the spring again then was looking at the 1000lb spings before

[binge]

The bounce doesn't come from a light or heavy spring. It comes from poorly adjusted compression and rebound.


Some of the lighter Supermoto lads run 550lb springs on MX style swing arms with no problems.

[thugwithissues]

Originally Posted by binge

The bounce doesn't come from a light or heavy spring. It comes from poorly adjusted compression and rebound.


Some of the lighter Supermoto lads run 550lb springs on MX style swing arms with no problems.

ok looks like ill get the 550 a try after all but can still feel myself thinking maybe got 750 lol dont worry ill control myself and get the 550

[prodigus83]

how i got my spacer sizes for my gull arm i went to b and q bought a piece of push fit pipe 12mm and made3 some spacers for both sides when i got the correct spacing i then took them into a workshop and got some one to make them up