YZ125 VIN Number Website

[pit bike pete!]

hi mate , we have had about 10 yz ,new and 2nd hand got a 2006 yz 125 now it has 12 numbers on engine and 12 on frame , this bike was from new

[Alex10]

Your best bet would be to ring a yamaha dealer and ask them.

[MiiTCH]

im dumpin it now... Because some people are saying its older than 03, whats the best thing to do and what do you lot think the year of it is?

[pit bike pete!]

year ?? say o2/03 , just have fun on it ,keep an eye on water and do a piston kit from time 2 time .full piston kit of ebay £45 , but get spare rings ,then just do the ring next time , that will keep it going 4 fun riding p.s do grear oil after 10hr keep them grears in good order

[MiiTCH]

Originally Posted by pit bike pete! year ?? say o2/03 , just have fun on it ,keep an eye on water and do a piston kit from time 2 time .full piston kit of ebay £45 , but get spare rings ,then just do the ring next time , that will keep it going 4 fun riding p.s do grear oil after 10hr keep them grears in good order

Ok, thanks mate i think its over due a piston kit, because its not got much compression, so im going to see how much it would cost for my local shop to do it, if its too much ill just buy the bits and do it myself

[englishjenny]

did you find out year?

[Wiggy_]

Originally Posted by MiiTCH Ok, thanks mate i think its over due a piston kit, because its not got much compression, so im going to see how much it would cost for my local shop to do it, if its too much ill just buy the bits and do it myself

about 160 quid my local shop wanted for a piston in my m8s yz 125 lol

[MiiTCH]

Originally Posted by englishjenny did you find out year?

Yea, its a 1998

But its not too bad, because all yz's from 98-05 are partly the same, when Yamaha got to 2005, they completely scraped the old engine design and re-made a complete new engine for 2006+

And i have a shop about 100metres from my house that are Yamaha specialists, and they gave us a parts catalogue for my bike, and it has EVERYTHING on the entire bike, so we can just order it from them which is a good thing

[yammy-lover]

Originally Posted by MiiTCH Thanks.. Im having a slight problem.. The only code i can find on the frame is CE01C004304... Which isnt long enough for a VIN Code... Where would you look to find a 17 Digit one.. The code I have is printed on the front of the frame where the forks are connected to.. HELP!!!!!

i was allways told the last 2 numbers in the code were what year the bike is.
meaning yours would be 04. mines right, stamped on the frame engine and swinger. everyone have a check and see if im right.

[MiiTCH]

Originally Posted by yammy-lover i was allways told the last 2 numbers in the code were what year the bike is. meaning yours would be 04. mines right, stamped on the frame engine and swinger. everyone have a check and see if im right.

I found out mines 1998..