Re: how to test electrics
turn the multimeter to A/C 20 or a low number.
put the black terminal on the green from the stator
put the red terminal on the blue/white from the stator
with the plug out kick it over.
you should get a low reading of around 3ish - this is the pickup. if you get nothing then thats faulty
put the black on the green again
put the red on the red/black from the stator
with the plug out kick it over
you should get a fairly decent reading of around 13ish - this is the coils in the middle. if you get nothing then its faulty.
put the black on the green from the CDI (the coil connector)
put the red on the black/yellow from the CDI (the other coil connector)
kick it over again
you should get a nice big reading of around 13 again, if not then the CDI is toast.
if all thats fine then snip the HT lead back at both ends & screw it back in. if its still the same then you need a coil.
|